Generac 5655 Liquid Cooled Standby Generator Maintenance Kit for 1.6L Engine

Generac 5655 Liquid Cooled Standby Generator Maintenance Kit for 1.6L Engine Review

Generac 5655 Liquid Cooled Standby Generator Maintenance Kit for 1.6L Engine Feature

• The Generac generator maintenance kit offers all the hardware necessary to perform a complete maintenance on Generac liquid-cooled generators
• Oil and coolant will need to be purchased separately based upon manufacturer recommendations
• Maintenance is recommended at every 200 hours or 2 years
• Includes air filter, oil filter, 4 spark plugs, spark plug wrench, oil funnel, chamois, and reminder sticker
• For 18-kilowatt low-speed, and 20-, 25-, and 30-kilowatt 3600-RPM 1.6-liter generators

Includes Air Filter, Oil Filter, (4) Spark Plugs, Spark Plug Wrench, Oil Funnel, Chamois, Reminder Sticker

Generac 6294 30-Amp 6-10 Circuit Manual Transfer Switch Kit for Portable Generators

Generac 6294 30-Amp 6-10 Circuit Manual Transfer Switch Kit for Portable Generators Review

Generac 6294 30-Amp 6-10 Circuit Manual Transfer Switch Kit for Portable Generators Feature

• Safely switch from utility to 30-amp portable generator power in an emergency and power critical circuits through your home?s electrical system
• Interchangeable type circuit breakers make it easy to reconfigure, replace, or expand the circuits in your switch
• Directly powers hard-wired appliances such as your furnace (gas/oil only), well pump, and septic pump
• Kit includes all components and suitable for surface mounting
• Comes with a 1-year limited warranty

The Generac 6294 30-Amp 6-10 Circuit Manual Transfer Switch Kit allows you to skip the hassle of running multiple extension cords from your generator to your appliances during a power outage. Instead, connect your Generac portable generator to a permanently installed Generac manual transfer switch. A Generac manual transfer switch allows you to safely switch from utility to portable generator power in an emergency and power critical circuits through your home’s electrical system. Use this transfer switch for 7,500-watt, 125/250-volt generators equipped with NEMA 3R L14-30 power outlets. The kit includes a 30-amp (6-10) circuit pre-wired transfer switch for surface mounting, a 10-foot 10/4 cord with L14-30 ends, wiring harness, conduit and fittings, wire connectors and installation manual. This item can be used with the GP5500, GP6500E, GO7500E, XG6500, XG7000E, XG8000E, XP6500E and XP8000E generators (XP units require a switch neutral kit). The mechanically interlocked generator and utility breakers prevent dangerous back feeding to avoid injuring utility line workers. This unit measures 9-1/4-inch wide, 11-1/8-inch high, 3-3/8-inch deep and weighs 19-pounds. The Generac 6294 30-Amp 6-10 Circuit Manual Transfer Switch Kit is backed by a 1-year limited warranty. Generac manufactures the widest range of power products in the marketplace including portable, RV, residential, commercial and industrial generators. Generac also operates three large factories that employ thousands of workers in the American Midwest.

Generac 0F7502 RV Generator Floor Mounting Tray Kit For QP40G, QP40LP

Generac 0F7502 RV Generator Floor Mounting Tray Kit For QP40G, QP40LP Review

Generac 0F7502 RV Generator Floor Mounting Tray Kit For QP40G, QP40LP Feature

• Designed for the QP40 RV Generator
• Allows gen to be mounted at floor level in a larger cutout area
• Compatibility: 4700, 4701, 4708, 4709, 5852, 5853

Quietpact 40 Floor Mount Kit � This mounting tray allows for the QP-40 gas or LP unit to be mounted at floor level in a larger cutout area.

Generac RV Generator Installation Kit For QP40G, QP40LP

Generac RV Generator Installation Kit For QP40G, QP40LP Review

Generac RV Generator Installation Kit For QP40G, QP40LP Feature

• Everything you need to install your RV generator
• Installation kit compatible with Generac QP-40 RV Generator Models: 4701, 4709, 5852, 5853
• Remote Start Panel with 30-foot Harness (0F0430) and 16-inch Run Tailpipe 1.25-inch O.D (0E0683)
• Remote Adapter Harness (connects to Onan remote) (0E1634A)
• Tail Pipe Hanger Bracket (0F2529)

Generac offers many different accessories to allow for easy installation and maintenance of your recreational vehicle generator. From scheduled maintenance kits to remote start / stop panels, Generac offers a full set of solutions. Includes remote start panel with 30 ft. harness, tailpipe with hanger, battery cable, remote adapter harness for connecting to an Onan remote, hanger bracket.

Briggs & Stratton Maintenance Minder Hour Meter 5081K

Briggs & Stratton Maintenance Minder Hour Meter 5081K Review

Briggs & Stratton Maintenance Minder Hour Meter 5081K Feature

• Maintenance Minder and Hour Meter
• Display Flashes every 25 Hours of Run Time
• For 2 and 4-Cycle Engines
• Genuine Briggs & Stratton Part

Briggs Stratton Small Engine Parts # 5081H HOURMETER-MAINT MNDR

GenTran 30 Amp 125-Volt Non-Metallic Generator Power Inlet Box NEMA L5-30

GenTran 30 Amp 125-Volt Non-Metallic Generator Power Inlet Box NEMA L5-30 Review

GenTran 30 Amp 125-Volt Non-Metallic Generator Power Inlet Box NEMA L5-30 Feature

• 30 Amp 125 volt non-metallic power inlet box for generators up to 3750 watts
• Durable, glass-filled nylon NEMA 3r-rated enclosure includes 30a 125v male inlet in NEMA configuration l5-30 on bottom
• High-impact, UV stabilized, glass-filled nylon resin
• Since generator connection is made on the bottom, these power inlet boxes retain the "rain tight" rating while in use
• A sloped top and posts on the back allow precipitation to drain off; UL listed

Use a power inlet box when you need to plug in your generator outdoors to connect to a transfer switch indoors. This non-metallic power inlet box is mounted on the exterior of a house or building, and your installer will run wire through the wall over to the transfer switch. Rated at 30-Amps @ 125-Volts for generators up to 3750-watt, this NEMA 3R-rated non-metallic enclosure is made from durable, glass-filled nylon and includes a 30-Amp 125-Volt male inlet in NEMA configuration L5-30 on bottom - so it retains a raintight rating when cord is connected, required by most inspectors. This model does not include a flip lid. For 125-Volt use only. UL Listed.

Champion Power Equipment No.C90015 Generator Cover for Champion 1200W-1500W Models

Champion Power Equipment No.C90015 Generator Cover for Champion 1200W-1500W Models Review

Champion Power Equipment No.C90015 Generator Cover for Champion 1200W-1500W Models Feature

• Made from durable, water repellent vinyl
• Specifically designed for champion generators to provided a custom fit
• Lightweight for easy coverage and movement
• Fits Champion Portable Generators from 1200-Watt to 1500-Watt sizes
• Note: do not operate generator while covered

Champion No.C90015 Generator Cover protects your Champion 1200-Watt to 1500-Watt Generator from the elements for storage or transporting. Made from durable, water resistant vinyl; the generator cover is specifically designed for a custom fit. Note: Cover is not to be used while generator is running. Cover dimensions are 18.9" (L) by 15.8" (W) by 14.2" (H). 90 Day Limited Warranty.